Bath construction process: possible problems and their solution
Walls can be made both from the beam and from the log. There are no big differences, with any form the smell of wood is preserved, and the walls perfectly pass the air. There are some controversial moments of experts: they advise the deciduous and coniferous breeds of trees not to mix with each other, there is a dispute about the use of a protective layer for the inner lining board. It is better to make a roof rafter and gable than beam – frame, single -tocate. There should be such an order – the attic and then the roof itself. When you mount the crate, it must be covered with a waterproof layer. Of course, a large role in the seal of the angle of this roof is played by the role of the climate area. In a word, if strong winds blow, then you make the roof not very steep (additional load on the structure), if there is a lot of snow in winter, then the roof should be with a steep slope angle (snow should not linger on the roof).
Actually, the construction of the bath is very long and laborious. If you still decide to do this work, then the construction can last six months and a year. The most important patience and dedication. In any case, you can call for the help of specialists. Good luck in your endeavors.