Pen -renewal installation technology
The masonry of foam concrete blocks is convenient to conduct with mounting glue. Cut the blocks with a special saw with a large tooth.
Starting from the first row of masonry, it is necessary to constantly monitor the correct position of the blocks.
The blocks of each next row of masonry are installed with the dressing of the seams.
In this case, wall laying is carried out from blocks of 100*200*600 mm, which allows you to easily ensure its verticality.
At the junction of the 3rd row of laying to the wall of the room, the mounting corner should be fixed.
When fitting small pieces of foam concrete blocks to the opening – you can not do without a metal grater.
After the laying of the wall, the marking line must be applied to it.
The desired shape of the wall is given by the same hacksaw with a large tooth.
Extra areas can also be removed with a chisel.
The walls folded and foamed blocks will have to be primed, under the spaces and give its surface the desired texture.
The soil can be applied with a brush.
The masonry seams should be putty and wiped.
With the help of a surface from a foam concrete block, you can make amends.
And with the help of putty, the surface can be given textured originality.
Slots at the joints can be sealed with acrylic sealant.
So the staircase with the decorative wall of their foam concrete block began to look like.