The technology of alignment of the ceiling with drywall
Many of us have encountered a problem such as uneven ceilings. The easiest way out is to align the ceiling using drywall. It must certainly be mounted on a metal frame mounted from profiles.
The lighting system is planned. Type and location of the fixtures are chosen in accordance with the ceiling project. The wiring is laid, isolated. Then the ceiling is marking. At the same time, they note the future location of the guides on the ceiling and walls. At this stage of work, a 28*27 mm profile is usually used.
It is very important to make markings correctly, since the final result of the work depends on it. If you draw uneven lines and mount the ceiling on them, then most likely it will turn out to be a crooked. Therefore, to make even lines, you need to use a level from 1.5 m to 2.0 m long. Putting it to the wall, you need to adjust its position so that the air bubble is exactly in the middle of the water scale. Draw a line. Similarly, you need to make marks throughout the room, and then fix the profiles on them.