Technology for strengthening brick walls
First you need to prepare the surface for plaster. To do this, it is necessary to clean from dust, dirt, subtexts, as well as remove the solution from the seams to a depth of about ten millimeters. Cut the nails into the seams or dowels so that the hats go about 20 mm, and between them there was a distance in a horizontal and vertical plane from 70 to 100 mm.
Start consolidating the rabid grid with cells from 50 to 80 mm, using a wire to tie it to the clogged dowels. The fastening of the grid must be performed for each nail, the only way to ensure a durable connection of the plaster to the wall surface can be achieved.