How is the installation of bitumen tiles
Compared to other roofing coatings, the installation of bitumen tiles is made on a continuous crate. The rafter place is filled with a thermal insulation layer. The heat insulator is isolated by the County barrier. The highest part is covered with a waterproof film, the front side to the heat insulator. The lower part of the heat insulator, from the inside – steamed protection. For ventilation, on rafter bars, stuff a counter crate. The next step of installation of a continuous crate, consume plywood sheets or OSB plates.
The material has a hydroelectricity function. Each sheet is laid in a checkerboard pattern, and the seam is not allowed to lay in the seam. Before you start laying the tile of bitumen tiles, the surface is cleaned and covered with a lining carpet. The inside of the plate is heated by a construction hairdryer, and the laying of the material from the lower row of the roof begins. The tile is overlapped, and is compacted with nails. In the process of using the structure, the races are rafted with rows of plates, and a continuous and impenetrable base is formed.